Electric Tongue Jacks
Leveling Blocks & Chocks
Quick Products QP-UBSBU Universal RV Bumper Support Bracket
RV bumpers may hold up during the eye test, looking strong enough to hold any add-on accessory. Go ahead, load on your bike racks and cargo carriers. After all, what could go wrong? The answer – nearly anything. Bumpers, while they may look strong, are not. The 4” x 4” hollow tube will generally be welded on, but that is often not enough. The leverage advantage your cargo carriers and add-ons gain against the bumper will surpass many manufacturer recommended weight capacities, while constant bouncing, turning and shifting can force extreme levels of torque against the welds. Just one speed bump, pothole, or mile of rough road can cause a bumper failure that will spill your precious cargo four lanes wide across the interstate.
Give your bumper some support. The Quick Products RV Bumper Support Bracket will do just that. Bolting directly to the RV’s frame, the brackets transfer the additional weight and torque of the cargo from a place that can’t handle it – the aforementioned bumper – to a place that can – the RV’s frame. The brackets cradle the bumper, holding it tight against the RV, preventing it from breaking loose or bending out of position and upgrading the bumper’s maximum weight capacity to 400 lbs. The high strength steel brackets will not bend or break while properly installed. Support bracket installation is easy, but some drilling and tools are required. All mounting hardware is included.
Universal Support Brackets fit standard 4” x 4” bumpers only, and are compatible with the following RV frame styles: tube frames, channel frames, and I-beam frames.
Strengthen your RV bumper to help prevent metal fatigue or complete bumper failure
Assists in the transfer of the additional weight of cargo carriers, bike racks, etc. to the RV’s frame instead of placing it solely upon the bumper and bumper welds
Universal Support Brackets fit standard 4” x 4” bumpers only
Compatible with the following RV frame styles: tube frames, channel frames, and I-beam frames
Increases the bumper’s maximum weight capacity to 400 lbs.
Includes two Bumper Support Brackets and all necessary mounting hardware
Easy installation with some drilling and tools required
Quick Products QP-MARD9.5 Magnesium Anode Rod for Atwood 10 Gallon Water Heaters - 9.5”, 1/2" NPT (Replaces 11593)
Quick Products QP-BOPCP Blow Out Plug Combo Pack
Quick Products QP-FASAL Adjustable Aluminum Platform Step
Quick Products QP-RVSS RV Skylight - 14" x 22" x 4", Smoke
Quick Products QP-QCBPGF-2PK Quick Connect Air Compressor Irrigation Blow Out Fitting - Female, 2-Pack
Quick Products QP-KFHS Kink-Free Hose Saver - 5/8"
Quick Products™ Swivel Adapter for 1/2" Hex Drives
Quick Products QPLSJS-2PK Deluxe Scissor Jack Leveling Socket - 2-Pack
Share your knowledge of this product.
Be the first to write a review »
www.quickproducts1.com. All Rights Reserved.