Electric Tongue Jacks
Leveling Blocks & Chocks
Quick Products QP-SBSB Standard RV Bumper Support Bracket
Quantity in Stock:
(Out of Stock)
RV bumpers may hold up during the eye test, looking strong enough to hold any add-on accessory. Go ahead, load on your bike racks and cargo carriers. After all, what could go wrong? The answer – nearly anything. Bumpers, while they may look strong, are not. The 4” x 4” hollow tube will generally be welded on, but that is often not enough. The leverage advantage your cargo carriers and add-ons gain against the bumper will surpass many manufacturer recommended weight capacities, while constant bouncing, turning and shifting can force extreme levels of torque against the welds. Just one speed bump, pothole, or mile of rough road can cause a bumper failure that will spill your precious cargo four lanes wide across the interstate.
Give your bumper some support. The Quick Products RV Bumper Support Bracket will do just that. Bolting directly to the RV’s frame, the brackets transfer the additional weight and torque of the cargo from a place that can’t handle it – the aforementioned bumper – to a place that can – the RV’s frame. The brackets cradle the bumper, holding it tight against the RV, preventing it from breaking loose or bending out of position and upgrading the bumper’s maximum weight capacity to 400 lbs. The high strength steel brackets will not bend or break while properly installed. Support bracket installation is easy, but some drilling and tools are required. All mounting hardware is included.
Strengthen your RV bumper to help prevent metal fatigue or complete bumper failure
Assists in the transfer of the additional weight of cargo carriers, bike racks, etc. to the RV’s frame instead of placing it solely upon the bumper and bumper welds
Standard Support Brackets fit standard 4” x 4” bumpers only, and are compatible with the following RV frame styles: tube frames, channel frames, and I-beam frames 6” tall or larger
Increases the bumper’s maximum weight capacity to 400 lbs.
Includes two Bumper Support Brackets and all necessary mounting hardware
Easy installation with some drilling and tools required
Quick Products QP-BMCSA Bumper-Mounted Cargo Support Arms
Quick Products QP-MARD9.5 Magnesium Anode Rod for Atwood 10 Gallon Water Heaters - 9.5”, 1/2" NPT (Replaces 11593)
Quick Products QP-RWOA3 RV Waste Outlet Adapter - 3"
Quick Products QP-UBSBU Universal RV Bumper Support Bracket
Quick Products QP-MARD4.5 Magnesium Anode Rod for Atwood Water Heaters - 4.5”, 1/2" NPT (Replaces 11553)
Quick Products QP-RWGVH RV Waste Gate Valve Handle - 2-7/8"
Quick Product QP-AK5000R RV Roof Vent with 3-Speed 12V Fan - Smoke/White
Quick Products JQ-VJCLARGE Electric Tongue Jack Cover - Large, 14.5" x 17.5"
Share your knowledge of this product.
Be the first to write a review »
www.quickproducts1.com. All Rights Reserved.